Mr.BarFace

Note: This generates toolpaths for facing rectangular slices off the top of a round bar laying horizontally. The bar is expected to be positioned along the X-axis. Z=0 represents the top of the bar.

Cutter Effective Diameter:

RPM:

Tool Number:

Round Bar Diameter:

Center X of Round Bar Face:

Center Y of Round Bar Face:

Angle of Bar on Table (degrees):

Length of Bar Being Cut:

Top of Z (Z=0 reference):

This is the reference point (Z=0)

End Cut in Z (negative distance from top):

Rapid Height in Z:

Depth of Cut in Z:

Final Pass in Z:

Entry Distance Along Ends of Cut:

Overlap Between Cuts:

Overhang Off Side of Cut:

Feed Rate: